THE RT-1000XL
THE RT-1000XL MAKES ROUTING SAFER AND EASIER
The RT-1000XL Router table stands 35" tall add 5.5"with the fence (incd). The cabinet is constructed using 18 mm Baltic birch plywood. This plywood is 13 layers of solid veneers ply's The best Baltic birch made. The shelves and uprights are made of 3/4" industrial grade melamine. The base cabinet, table,fence and drawer fronts are trimmed In rock maple and black Walnut.
 
The RT-1000XL Router table would be an excellent addition for your woodworking shop. All the joints are dado, rabbet, glued and brad nailed. Cabinet. The table top is just the perfect size, 32" wide x 24" deep And a hefty 1.5" thick for stability and flatness. This unit weighs in over 125 lbs
SOLID & HEAVY

The RT-1000XL has a 3.5" dust port on the RIGHT sidefor attaching your vacuum system (easily adapted to 4") and has a 2.5" port in the top under the fence incase you prefer to use a shop vac. There are 5 drawers in the RT-1000XL. 3 drawers hold 42 -- 1/2 router bits. 1 drawers hold 22-- 1/4" router bits. One drawer to store your wrenches, template guides, bearings etc. The large lower drawer is included and is mounted on heavy duty full extension drawer slides with a Load Capacity of 100 lbs.
The RT-1000XL is our only model that comes with a Miter-T-Track for those miter gauges that have a t-slot bar. Standard miter gauges will also work with this model.
Each sliding fence on this split fence system can be adjusted up to 3/4" for glue joint work. More importantly, it will go back to a straight edge in seconds. For vertical panel a high fence can be easily adapted. The fence will open from 0 to 5". It moves back and forth 5" for those odd shapes, and free hand work. Best of all this unit will still collect 99% of the saw dust. The fence includes an alum. t track.


The vented acrylic glass door covering the router compartment. It is hinged and has a magnetic catch to hold the door closed. There are two electrical outlets in the base cabinet that are controlled by an external Safety Paddle Switch and a power cord wired for 110-120 volts. The safety paddle switch is also included with each RT-1000XL model. It comes with a removable yellow lock to prevent unwanted start ups.
The insert plate is made out of 3/8 thick Lexan. Very strong,, easy to drill and no worries of cracking or sagging. One insert is included with each router table. There are 3 sizes available. Blank, 2" and 3.5" opening. If not specified a 2" will be included with each order. The Insert size is
9 1/4" x 11 3/4" x 3/8". The more popular router lifts will fit right in. After receiving your RT-1000XL, it takes 10 to 15 min to assemble the top to the lower cabinet using the supplied hardware and mounting instructions. The reason shipping is high i the unit weighs over 125 lbs and it is shipped to you basically fully assembled.

Return to Top