best router table
Home | Canada shopping cart | USA shopping cart | RT1000XL | XL OAK | Accessories | RT1000SX | RT1000SE | LAYAWAY


RT1000SE


The RT1000SE would be an excellent addition to any woodworking shop. Cabinet, table and fence are trimmed in solid Black American Walnut and clear White Maple.
The RT1000SE stands 35" from floor to top of the table surface. Higher with the fence which is included. The table top is 32" wide x 24" deep , hefty 1.1/2" thick for stability and flatness. This unit weighs in over 125 lbs
The cabinet is constructed using 18 mm Baltic birch plywood. This plywood is 13 layers of solid veneers ply's The shelves and uprights are made of 3/4" industrial grade melamine. Joints are dado, rabbet, glued and brad nailed very well built

There are 5 drawers in our router tables. 2 drawers hold 44 -- 1/4 router bits. 2 drawers hold 28-- 1/2" router bits. We can modify these in case you prefer all 1/2 drawers. One drawer to store your wrenches, template guides, bearings etc.
The RT1000SE model that comes with a Miter-T-Track for those miter gauges that have a t-slot bar. Standard miter gauges will also work with this model. There are two electrical outlets in the base cabinet that are controlled by an Switch on a 8 foot power cord wired for 110-120 volts.
The insert plate is made out of 3/8 Lexan. Very strong and has 8 leveling set screws. One insert is included with each router table. There are 3 sizes available. (Blank), (2") and (3.5") opening. If not specified at point of sale a 2" will be included with each order. Insert size is 9 1/4" x 11 3/4" x 3/8". The Same size as most popular router lifts. The RT1000SE model that comes with a Miter-T-Track for those miter gauges that have a t-slot bar. Standard miter gauges will also work with this model.

The RT1000SE has a 3.5" dust port on the left side for attaching your vacuum system (easily adapted to 4"). It has a 2.5" port cut in the top under the fence incase want to use a smaller hose shop vac. The 3 vented holes in the acrylic door, allow air flow and circulate that keeps the router compartment free of dust. The(hinged)door covering the router compartment has a magnetic catch to hold the door closed
The fence includes an alum. t-track for attaching feather boards, stops, guards and other fences and jigs. Each sliding fence on this split fence system can be adjusted over 1/2" for glue joint work. More importantly, it will go back to a straight edge in seconds. For vertical panel a high fence can be easily adapted.
The fence sliders will open from 1/2" to 5". You can be set it 1/2" in front of the bit for taking multiple passes and slide back as much as 5" for routing inside front edge. For those odd shapes or free hand work, set it completely back and wide open this unit will still collect 99% of the saw dust.

The bottom cabinet comes fully assembled and packaged in a box surrounded in Styrofoam. 24" x 21" x 35" The top is shipped in a separate box. 35" x 26" x 5.5" After receiving your RT1000SE, it may takes 10 to 15 minutes to assemble the top to the lower cabinet using the supplied hardware and mounting instructions, then your ready to go.

Return to Top

.